Cameras, Leak Detectors, and Power Meters
FLIR Si2-Pro Acoustic Camera
Industrial Acoustic Imaging Camera for Partial Discharge Detection, Pressurized Leak Detection and Mechanical Fault Detection. Useful for identifying and quantifying compressed air leaks (or other gases).
*Available for use with Utility staff only
For more information, click here.
FLIR E4 Thermal Imaging Camera
Thermal Imaging Camera for visualizing heat in a variety of applications. Identify areas lacking insulation, inspect electrical components for excessive heat, identify issues with motors and mechanical equipment, water infiltration, and HVAC equipment.
For more information, click here.
UE Systems Ultrasonic Leak Detector – Ultraprobe 9000
Detects compressed air leaks, bearing condition, and steam trap leaks.
For more information, click here.
UE Systems Ultrasonic Leak Detector – Ultraprobe 3000
Detects compressed air and steam trap leaks.
For more information, click here.
Hioki 3197 Power Quality Analyzer
3-Phase 4-Wire Portable Power Quality Analyzer to Detect, Measure and Record Power Quality Issues, Harmonics, Demand, Inrush and Power Transients. Uses three (3) 100 amp current clamps or three (3) 500-5000 amp switchable 7” diameter flexible current sensors.
For more information, click here.
Hioki PW3365 Clamp On Power Logger
3-Phase 4-Wire Portable Power Meter/Logger. Capable of taking true power measurements using non-contact voltage measurement for enhanced safety. Uses three (3) 100 amp current clamps or three (3) 500-5000 amp switchable 7” diameter flexible current sensors.
For more information, click here.
Fluke 345 Power Quality Clamp Meter – Electronic Power Meter
Power analyzer, power quality logger, oscilloscope, data logger, and power meter. Measure up to 1400 amps RMS or 2000 amp DC – 600 volt CAT IV rated. Troubleshoot variable frequency drives and UPS systems, harmonic measurements, inrush current capture, load studies, etc..
For more information, click here.
Loggers and Sensors
Dent ElitePro XC Electrical Usage Logger
Monitor power consumption of electrical systems. Paired with 16” Rogowski Coil current transducers rated at 1000 amps.
For more information, click here.
Dent Instruments Smartloggers
Standalone data loggers for monitoring Time-of-Use of lighting and other electrical loads.
MAGlogger detects electric fields to sense when an electric motor is running. LIGHTINGlogger detects and Records Lighting On/Off Status
For more information, click here.
Onset MX1104 HOBO Temp/RH/Light/Ext-Analog Data Logger
Onboard temperature, relative humidity, and light intensity sensors can be used without external sensors. Includes an external analog input to attach a variety of additional sensors.
For more information, click here.
Onset MX1105 HOBO 4-Channel Analog Data Logger
Four channel inputs to measure and transmit data wirelessly from chosen sensors to your mobile device or Windows laptop via Bluetooth technology.
For more information, click here.
Onset Self-Describing Current Transformer Sensor
For use with HOBO MX1104 and MX1105 Multi-Channel data loggers, this split-core AC current transformer offers integrated strain relief, so the probe is secured to the logger.
Available in 20, 50, 100, 200, and 600 Amp sizes.
For more information, click here.
Onset Self-Describing 20-foot Air/Water/Soil Temperature Sensor
For use with HOBO MX1104 and MX1105 Multi-Channel Data Loggers, this air/water/soil temperature sensor offers integrated strain relief, so the probe is secured to the logger.
For more information, click here.
Onset Self-Describing 6-foot Pipe Temperature Sensor
For use with HOBO MX1104 and MX1105 Multi-Channel Data Loggers, this temperature sensor, which is suitable for pipe mounting, offers integrated strain relief, so the probe is secured to the logger.
For more information, click here.